|
PRINCIPAL VOICE COMMANDS
|
|
Function
|
Voice Commands Accepted
|
Notes
|
|
| HELP |
| Help me please |
| I do not understand |
| I don't understand |
| I need help |
| Please help me |
|
Provides contextual help at all levels within the program. |
| |
| SYSTEM |
Activate the system Enable the system |
Enables the voice recognition and First Officer activities. |
| |
| SYSTEM |
Deactivate the system Disable the system |
Disables the voice recognition and First Officer activities. |
| |
| Push-To-Talk |
| Activate push to talk |
| Deactivate push to talk |
|
Enables/disables Push-To-Talk (PTT) facilities through the use of the Scroll Lock key.
NOTE: The PTT setting is retained on subsequent launches of the application. |
| |
| Speech Bar |
| Display speech Bar |
| Hide speech bar |
|
Displays/hides the speech bar |
| |
| Pause |
Pause (the) simulator |
Places the simulator in pause mode. |
| Run |
Run (the) simulator |
Takes the simulator out of pause mode. |
| |
| Sound |
Simulator sound |
Enables simulator sound. |
| |
| Full Screen |
Full screen |
Toggle Full Screen mode on/off. |
| |
| Stop Michelle |
| Hang on a moment |
| Not right now |
| Please be quiet |
| Wait a minute |
|
Make Michelle Stop Talking |
| |
| Start Michelle |
| I'm all yours |
| I'm all yours again |
| Please continue |
| Repeat please |
| Say again |
| You were saying? |
|
Ask Michelle to Start Talking |
| |
| Let Michelle Handle Airspeed |
| I would like you to control the speed |
| Michelle, I would like you to control the speed |
| I would like you to handle the speed |
| Michelle, I would like you to handle the speed |
|
Ask Michelle to handle the airspeed above the transition level. |
| |
| You Handle the Airspeed |
| I will control the speed |
| Michelle, I will control the speed |
| I will handle the speed |
| Michelle, I will handle the speed |
|
You take control of the airspeed above the transition level. |
| |
| FS Navigator |
|
Bring up, or remove, FS Navigator (if installed). |
| |
| ATC |
|
Brings up, or removes, the Flight Simulator's ATC popup window. |
| |
| ATC Acknowledgment |
| (Let's do) all (of the) checklists | |
The First Officer calls out and verifies all the checklists and their items.
VERY IMPORTANT NOTE: This command should only be used if the aircraft is sitting cold and dark
at the origination airport gate or ramp, with a complete flight plan loaded into the Flight Simulator.
WARNING - Do not excute this command in flight.
|
| |
| ATC Menu Selection |
| Select one |
| Select two |
| Select three |
| Select four |
| Select five |
| Select six |
| Select seven |
| Select eight |
| Select nine |
| Select niner |
| Select zero |
| Menu item one |
| Menu item two |
| Menu item three |
| Menu item four |
| Menu item five |
| Menu item six |
| Menu item seven |
| Menu item eight |
| Menu item nine |
| Menu item niner |
| Menu item zero |
| {FLIGHTNUMBER} (heavy) cleared for take off (sends 1) |
| {FLIGHTNUMBER} (heavy) cleared to land (runway ??) (sends 1) |
| {FLIGHTNUMBER} (heavy) is with you (sends 1) |
| {FLIGHTNUMBER} (heavy) request flight following (sends 1) |
| Request IFR clearance (sends 2) |
| Request IFR taxi (sends 2) |
| Request taxi IFR (sends 2) |
| Request takeoff (sends 3) |
|
Sends the expressed value to the ATC popup window.
NOTE: The {FLIGHTNUMBER} is loaded from the flight plan. |
| |
| ATC Acknowledgment |
| Activate ATC Responses |
| Deactivate ATC Responses | |
When this feature is ACTIVATED, and you say, "Climb and maintain ????", or "Descent and maintain ????", or "Turn left heading ???", or "Turn right heading ???"
the system will send a NUMERIC ONE ("1") to the ATC window to acknowledge the ATC instruction.
VERY IMPORTANT NOTE: Care must be taken using this facility.
If the ATC window has been left open in some other standby mode, the execution of
a NUMERIC ONE ("1") to the ATC window might be understood by ATC as a request for a new runway,
select a new IFR destination, or whatever. Therefore, make certain that you
close the ATC window (if it has been left open by the FS) by simply saying, ATC."
|
| |
| View (FS2004) |
| Look straight ahead |
| Look front |
| Look to the front |
| Look front right |
| Look right front |
| Look right |
| Look to the right |
| Look rear right |
| Look right rear |
| Look rear |
| Look to the rear |
| Look rear left |
| Look left rear |
| Look left |
| Look to the left |
| Look front left |
| Look left front |
| Look up { DIGIT } |
| Look down { DIGIT } |
| Look top down |
| Cabin view |
| Cockpit view |
| Tower view |
| Spot view |
| Complete view |
| Virtual Cockpit view |
| Zoom Normal |
| Zoom Inwards |
| Zoom Outwards |
|
Switches the Captain's view of the aircraft.
(e.g., Look front... look down 3) |
| |
| Coordinates/FPS (FS2004) |
| Display nothing |
| Display coordinates |
| Display frames per second |
| Display coordinates and frames per second |
|
Coordinates and Frames Per Second display bar. |
| |
| Coordinates/FPS (FSX) |
|
Cycle through the Coordinates and Frames Per Second display bar. |
| |
Execute All Checklists |
| (Let's do) all (of the) checklists | |
The First Officer calls out and verifies all the checklists and their items.
|
| |
| Resume Checklists |
|
The First Officer calls out the next checklist in the sequence.
|
| |
| Restart cold |
| Restart cold and dark |
| Start up cold and dark |
| Reset cold and dark |
|
When an existing flight is loaded, or a new flight is created, this function forces the aircraft to cold and dark. |
| |
Pre-Flight Checklist |
| (Let's do the) pre-flight checklist |
| (Let's run through the) pre-flight checklist |
|
The First Officer calls out and verifies the checklist items. |
| |
Before Start Up Checklist |
| (Let's do the) before start (up) checklist |
| (Let's run through the) before start (up) checklist |
|
The First Officer calls out and verifies the checklist items. |
| |
| Push back |
| Pushback clearance obtained |
| Ready for push back |
| Start pushback please |
|
Commences push back. |
| Tail left |
Push the tail left |
Pushes the tail left. |
| Tail right |
Push the tail right |
Pushes the tail right. |
| Stop push back |
Stop push back |
Stops the push back. |
| |
Start Up Checklist |
| (Let's do the) start up checklist |
| (Let's run through the) start up checklist |
| (Let's run down the) start up checklist |
|
The First Officer calls out and verifies the checklist items. |
| |
Before Taxi Checklist |
| (Let's do the) before taxi checklist |
| (Let's run through the) before taxi checklist |
| (Let's run down the) before taxi checklist |
|
The First Officer calls out and verifies the checklist items. |
| |
Taxi Checklist |
| (Let's do the) taxi checklist |
| (Let's run through the) taxi checklist |
| (Let's run down the) taxi checklist |
|
The First Officer calls out and verifies the checklist items. |
| |
Before Takeoff Checklist |
| (Let's do the) before takeoff checklist |
| (Let's run through the) before takeoff checklist |
| (Let's run down the) before takeoff checklist |
|
The First Officer calls out and verifies the checklist items. |
| |
Takeoff and Climb Out Checklist |
| (Let's do the) takeoff checklist |
| (Let's run down the) takeoff checklist |
| (Let's run through the) takeoff checklist |
| (Let's do the) takeoff and climb out checklist |
| (Let's run down the) and climb out takeoff checklist |
| (Let's run through the) and climb out takeoff checklist |
|
The First Officer calls out and verifies the checklist items.
NOTE: The command executes both the Takeoff and Climb Out checklists. |
| |
Cruise Checklist |
| (Let's do the) cruise checklist |
| (Let's run down the) cruise checklist |
| (Let's run through the) cruise checklist |
| (Let's do the) cruising checklist |
| (Let's run down the) cruising checklist |
| (Let's run through the) cruising checklist |
|
The First Officer calls out and verifies the checklist items.
NOTE: This command is to be executed once the aircraft climbs above 10,000 feet. |
| |
Descent Checklist |
| (Let's do the) descent checklist |
| (Let's run down the) descent checklist |
| (Let's run through the) descent checklist |
|
The First Officer calls out and verifies the checklist items.
NOTE: This command is to be executed as long as the aircraft is above 14,000 feet. |
| |
Approach And Landing Checklist |
| (Let's do the) approach checklist |
| (Let's run down the) approach checklist |
| (Let's run through the) approach checklist |
| (Let's do the) approach and landing checklists |
| (Let's run down the) approach and landing checklists |
| (Let's run through the) approach and landing checklists |
|
The First Officer calls out and verifies the checklist items.
NOTE: This command executes both the Approach and Landing checklists and should only be executed
after the aircraft has descended to, and maintains, the approach level - typically on base,
or 5 miles before intersecting the ILS. |
| |
Taxi To The Gate Taxi To The Ramp Checklist |
| (Let's do the) taxi to the gate checklist |
| (Let's run down the) taxi to the gate checklist |
| (Let's run through the) taxi to the gate checklist |
| (Let's do the) taxi to the ramp checklist |
| (Let's run down the) taxi to the ramp checklist |
| (Let's run through the) taxi to the ramp checklist |
|
The First Officer calls out and verifies the checklist items. |
| |
Parking Checklist |
| (Let's do the) parking checklist |
| (Let's run down the) parking checklist |
| (Let's run through the) parking checklist |
|
The First Officer calls out and verifies the checklist items.
NOTE: This command places the aircraft in a resting state, ready for a turn around.
If you want to force the aircraft into a cold and dark state, execute the Shut Down checklist below.
|
| |
Shut Down Checklist |
| (Let's do the) shut down checklist |
| (Let's run down the) shut down checklist |
| (Let's run through the) shut down checklist |
|
The First Officer calls out and verifies the checklist items.
NOTE:This command places the aircraft in the cold and dark state.
|
| |
| Cancel Checklist |
Cancel checklist |
Cancels an active checklist procedure. |
| |
| Checked |
| Checked |
| Checked on |
| Checked off |
| Is on |
| Is off |
| Roger |
| OK |
| Verified |
| (IFR) (taxi) (takeoff) clearance (has been) obtained |
| (The) aircraft lighting (has been) checked |
| (The) avionics are set for departure |
| (The) elevator trim (has been) checked |
| (The) elevator trim (has been) verified |
| (The) engine areas are clear |
| (The) engine instruments (have been) checked |
| (The) flight controls (have been) checked |
| (The) flight instruments (have been) checked |
| (The) fuel quantity (has been) checked |
| (The) nav equipment (has been) checked |
| (The) navigation equipment (has been) checked |
| (The) radios (have been) checked |
| (The) standby instruments (have been) checked |
| (Roger) we are clear on the left |
| (Roger) all clear on the left |
| (Yes) we are clear on the left |
| (Yes) all clear on the left |
| (The) salute (has) (been) received |
| We have (the) (V1 VR V2) data |
| We have (the) (I F R) clearance |
| We have (the) (I F R) takeoff clearance |
| We have (the) (I F R) taxi clearance |
| We have (the) weather (report) |
(e.g., IFR takeoff clearance obtained) |
| (e.g., The elevator trim has been verified) |
| (e.g., Nav equipement checked) |
| (e.g., We have the data) |
|
All of the phrases to the left infer... "checked"
|
| |
| Get Weather |
| Get (the) weather for { PHONETIC } |
| (e.g., Get weather for Charlie, Yankee, Victor, Romeo) |
|
Gets the weather for the specified airport using a phoentically expressed ICAO.
|
| |
| Destination Airport |
| Destination airport { PHONETIC } |
| Make the destination airport { PHONETIC } |
| Set (the) destination airport to { PHONETIC } |
| (e.g., Set the destination airport to Kilo, Sierra, Echo, Alpha) |
|
Sets the destination airport to one other than the original planned airport, in the event of a diversion.
|
| |
| Flight Data |
Get (the) flight data |
The First Officer calls out the current flight data. |
| |
| Flight Following |
Make a flight following announcement |
The First Officer makes a flight following announcement to the passengers. |
| |
| Cabin Music |
|
Turns the Cabin Music on or off. |
| |
| Fuel Quantity |
| Check fuel quantity |
| Verify fuel quantity |
|
Pops up the Flight Simulator's Aircraft > Fuel and Payload window.
|
| |
| Pop Up Windows |
| Bring up the { WINDOW NAME } |
| Get rid of the { WINDOW NAME } |
|
Pops up or removes the Flight Simulator's Pop Up Windows by name ( see Window Names above )
|
| |
| Window Names |
What are the window names? |
Reads back the pop up window names for the particular aircraft. e.g., "Radio Stack", "Throttle Quadrant", etc. |
|
|
VOICE COMMANDS IN ALPHBETICAL ORDER
|
| |
| Abort Takeoff |
| Abort Takeoff |
| Reject Takeoff |
|
Causes the aircraft to execute a rejected takeoff sequence.
|
| |
| ADF Frequency |
| Set ADF to { DIGIT } { DIGIT } { DIGIT } point { DIGIT } |
| Set the ADF to { DIGIT } { DIGIT } { DIGIT } point { DIGIT } |
| Tune ADF to { DIGIT } { DIGIT } { DIGIT } point { DIGIT } |
| Tune the ADF to { DIGIT } { DIGIT } { DIGIT } point { DIGIT } |
|
Sets the ADF frequency.
NOTE: The system will not recognise ZERO as the first digit.
IMPORTANT NOTE: The system currently supports 100.0 to 999.5. Frequencies above 999.5 are not supported and must be entered manually by the Captain.
|
| |
| ADF Identity |
| (Set) (the) ADF Ident { ONOFF } |
| (Turn) (the) ADF Ident { ONOFF } |
| (Set) (the) ADF Identity { ONOFF } |
| (Turn) (the) ADF Identity { ONOFF } |
|
Sets the ADF Identity switch on or off. |
| |
| Air Speed |
| Air speed { AIRSPEED } |
| Make the air speed { AIRSPEED } |
| (e.g., Make the air speed two five zero.) |
|
Sets the autopilot's IAS (Indicated Air Speed). |
| |
| Alternator Switch |
| (Set) (the) master alternator (switch) { ONOFF } |
| (Turn) (the) master alternator (switch) { ONOFF } |
|
Sets the Master Alternator switch on or off. |
| |
| Altimeter |
Altimeter { DIGIT } { DIGIT } (point) { DIGIT } { DIGIT }
(e.g., Altimeter two niner point niner two)
(e.g., Altimeter one zero one three)
|
|
Sets the altimeter to the expressed value.
IMPORTANT NOTE:
If the phrase commences with a "2" or a "3", (e.g., 2992 or 3024),
then the system is expecting the altimeter setting expressed as inches of mercury.
If the phrase commences with a "0" or a "1", (e.g., 0978 or 1013),
then the system is expecting the altimeter setting as Millibars.
|
| |
| Altitude hold |
|
Turns the altitude hold on or off. |
| |
| Anti Ice |
| Anti ice { ONOFF } |
| De-ice { ONOFF } |
|
Turns the anti ice on or off. |
| |
| AP Altitude |
| Climb and maintain { ALTITUDE } |
| Climb and maintain flight level { FLIGHTLEVEL } |
| Descend and maintain { ALTITUDE } |
| Descend and maintain flight level{ FLIGHTLEVEL } |
Make (the) altitude { ALTITUDE }
| Set (the) altitude to { ALTITUDE }
| Set the altitude to flight level { FLIGHTLEVEL }
| |
Sets the autopilot's altitude.
NOTE:
The North American altitude transition level is 18,000. The system also supports standard
European transition levels of 3,000, 4,000, 4,500 and 6.000 and can be configured before flight time.
Please refer to: http://en.wikipedia.org/wiki/Flight_level#Transition_altitude for more details.
|
| |
| AP Back Course |
| (Set) (the) back course { ONOFF } |
| (Turn) (the) backcourse { ONOFF } |
| (Select) (the) backcourse { ONOFF } |
| (Switch to) (the) backcourse { ONOFF } |
|
Sets the autopilot's back course on or off.
|
| |
| AP Course |
| Make (the) course { DIGIT } { DIGIT } { DIGIT } (degrees) |
| Set (the) course to { DIGIT } { DIGIT } { DIGIT } (degrees) |
Set (the) course to heading { DIGIT } { DIGIT } { DIGIT } (degrees)
(e.g., Set the course to two zero five degrees.) |
|
Sets the autopilot's course. |
| |
| AP Heading |
| Set ( the ) heading to { DIGIT } { DIGIT } { DIGIT } (degrees) |
| Make the heading { DIGIT } { DIGIT } { DIGIT } (degrees) |
Turn left heading { DIGIT } { DIGIT } { DIGIT } (degrees)
| Turn right heading { DIGIT } { DIGIT } { DIGIT } (degrees)
(e.g., Turn right heading zero niner five) |
|
Sets the autopilot's heading.
NOTE: All three digits need to be expressed. (e.g., Set heading to zero zero five) |
| |
| AP Master Switch |
| (Set) (the) auto pilot { ONOFF } |
| (Turn) (the) auto pilot { ONOFF } |
| (Set) (the) autopilot { ONOFF } |
| (Turn) (the) autopilot { ONOFF } |
|
Sets the autopilot on or off.
|
| |
| AP Nav Hold |
| Set NAV { ONOFF } |
| Set NAV hold { ONOFF } |
| Set VOR { ONOFF } |
| Set VOR hold { ONOFF } |
| Set NAV VOR { ONOFF } |
| Set NAV VOR hold { ONOFF } |
|
Sets the autopilot's Nav 1 on or off.
|
| |
| AP Nav / GPS Select |
| Set NAV GPS on NAV |
| Set NAV GPS to NAV |
| Set NAV GPS on GPS |
| Set NAV GPS to GPS |
| Set Navigation GPS on Navigation |
| Set Navigation GPS to Navigation |
| Set Navigation GPS on GPS |
| Set Navigation GPS to GPS |
|
Sets the autopilot's Nav/GPS selector.
|
| |
| AP ILS Approach |
| Engage ILS approach (mode) |
| Select ILS approach (mode) |
| Set I L S approach (mode) |
| Switch to I L S approach (mode) |
| Disengage ILS approach (mode) |
|
Sets the autopilot's ILS approach mode on or off.
|
| |
| AP Vertical Speed |
| Set (the) vertical speed to { VERTICALSPEED } |
| Increase (the) vertical speed to { VERTICALSPEED } |
| Decrease (the) vertical speed to { VERTICALSPEED } |
| Set (the) rate of climb to { VERTICALSPEED } |
| Set (the) rate of descent to { VERTICALSPEED } |
| Set (the) vertical rate of climb to { VERTICALSPEED } |
| Set (the) vertical rate of descent to { VERTICALSPEED } |
| Increase (the) vertical rate of climb to { VERTICALSPEED } |
| Decrease (the) vertical rate of climb to { VERTICALSPEED } |
| Increase (the) vertical rate of descent to { VERTICALSPEED } |
| Decrease (the) vertical rate of descent to { VERTICALSPEED } |
|
Sets the autopilot's vertical rate of ascent or descent.
|
| |
| A P U |
| (Set) (the) A P U { ONOFF } |
| (Turn) (the) A P U { ONOFF } |
|
Sets the A P U on or off. |
| |
| Approach Frequencies |
| Get the approach frequency for (runway) { RUNWAY } |
| Load the approach frequency for (runway) { RUNWAY } |
| Get the I L S approach frequency for (runway) { RUNWAY } |
| Load the I L S approach frequency for (runway) { RUNWAY } |
| Set NAV one to the approach frequency of (runway) { RUNWAY } |
| Set NAV one to the I L S approach frequency of (runway) { RUNWAY } |
|
Loads NAV1 with the ILS/Backcourse frequency for the selected runway. |
| |
| AutoBrakes |
| Set (the) autobrakes to RTO |
| Set (the) autobrakes to rejected takeoff |
| Set (the) autobrakes off |
| Set (the) autobrakes to off |
| Set (the) autobrakes to position one |
| Set (the) autobrakes to position two |
| Set (the) autobrakes to position three |
| Set (the) autobrakes to (the) maximum |
|
Sets the autobrakes switch. |
| |
| AutoSpoilers |
| (Set the) auto spoilers { ONOFF } |
| (Turn the) auto spoilers { ONOFF } |
|
Sets the auto spoilers switch on or off. |
| |
| AutoThrottle |
| (Set the) auto throttle { ONOFF } |
| (Turn the) auto throttle { ONOFF } |
|
Sets the AutoThrottle on or off. |
| |
AutoThrottle IAS, and/or Throttle Lock |
| (Set the) I A S { ONOFF } |
| (Turn the) I A S { ONOFF } |
| (Set the) indicated air speed { ONOFF } |
| (Turn the) indicated air speed { ONOFF } |
| (Set the) throttle lock { ONOFF } |
| (Turn the) throttle lock { ONOFF } |
|
Sets the AutoThrottle's IAS switch on or off. |
| |
| Avionics |
| (Set) (the) avionics { ONOFF } |
| (Turn) (the) avionics { ONOFF } |
|
Sets the avionics on or off.
|
| |
| Battery Master Switch |
| (Set) (the) master (power) switch { ONOFF } |
| (Turn) (the) master (power) switch { ONOFF } |
| (Set) (the) battery master (power) switch { ONOFF } |
| (Turn) (the) battery master (power) switch { ONOFF } |
|
Sets the Master switch on or off. |
| |
| Beacon Light |
| (Set) (the) beacon light { ONOFF } |
| (Turn) (the) beacon light { ONOFF } |
|
Sets the beacon light on or off.
|
| |
| Cabin Lights |
| (Set) (the) cabin lights { ONOFF } |
| (Turn) (the) cabin lights { ONOFF } |
|
Sets the cabin lights on or off.
|
| |
| Com1 Frequency |
| Set Com1 to { DIGIT } { DIGIT } { DIGIT } point { DIGIT } { (DIGIT) } { (DIGIT) } |
| Tune Com1 to { DIGIT } { DIGIT } { DIGIT } point { DIGIT } { (DIGIT) } { (DIGIT) } |
| Go to { DIGIT } { DIGIT } { DIGIT } point { DIGIT } { (DIGIT) } { (DIGIT) } |
| Going to { DIGIT } { DIGIT } { DIGIT } point { DIGIT } { (DIGIT) } { (DIGIT) } |
| Load the approach frequency for { RUNWAY } |
| Load the ILS approach frequency for { RUNWAY } |
| Set NAV to the approach frequency for { RUNWAY } |
| Set NAV to the ILS approach frequency for { RUNWAY } |
| Examples: |
| Go to 128.0 |
| Going to 128.5 |
| Set Com1 to 128.25 |
| Tune Com1 to 128.375 |
| Load the approach frequency for one six left |
| Set NAV one to the ILS approach frequency of four center |
|
Sets the Com1 frequency.
The system will only recognise valid Com frequencies.
|
| |
| Com1 Standby |
| Set Com1 Standby to { DIGIT } { DIGIT } { DIGIT } point { DIGIT } { (DIGIT) } { (DIGIT) } |
| Tune Com1 Standby to { DIGIT } { DIGIT } { DIGIT } point { DIGIT } { (DIGIT) } { (DIGIT) } |
| Examples: |
| Set Com1 Standby to 128.0 |
| Tune Com1 Standby to 128.125 |
|
Sets the Com1 Standby frequency.
The system will only recognise valid Com frequencies.
|
| |
| Com2 Frequency |
| Set Com2 to { DIGIT } { DIGIT } { DIGIT } point { DIGIT } { (DIGIT) } { (DIGIT) } |
| Tune Com2 to { DIGIT } { DIGIT } { DIGIT } point { DIGIT } { (DIGIT) } { (DIGIT) } |
| Examples: |
| Set Com2 to 123.0 |
| Tune Com2 to 128.125 |
|
Sets the Com2 frequency.
The system will only recognise valid Com frequencies.
|
| |
| Com2 Standby |
| Set Com2 Standby to { DIGIT } { DIGIT } { DIGIT } point { DIGIT } { (DIGIT) } { (DIGIT) } |
| Tune Com2 Standby to { DIGIT } { DIGIT } { DIGIT } point { DIGIT } { (DIGIT) } { (DIGIT) } |
| Examples: |
| Set Com2 Standby to 135.0 |
| Tune Com2 Standby to 131.875 |
|
Sets the Com2 Standby frequency.
The system will only recognise valid Com frequencies.
|
| |
| DME Identity |
| (Set) (the) DME Ident { ONOFF } |
| (Turn) (the) DME Ident { ONOFF } |
| (Set) (the) DME Identity { ONOFF } |
| (Turn) (the) DME Identity { ONOFF } |
|
Sets the ADF Identity switch on or off. |
| |
| Doors |
|
Closes and opens aircraft front door. |
| |
| Engine Fuel |
| (set the) Mixture (to) { RICHLEAN } |
|
Sets the fuel mixture. |
| |
| Engine #1 Fuel |
| (set) (turn) (the) Engine 1 fuel valve { ONOFF } |
| (set) (turn) (the) Number 1 fuel valve { ONOFF } |
| (set) (turn) (the) Engine number 1 fuel { ONOFF } |
| (set) (turn) (the) Number 1 fuel { ONOFF } |
|
Turns the Engine #1 fuel valve on or off. |
| |
| Engine #1 Startup |
| Start engine 1 |
| Start engine number 1 |
| Fire up engine 1 |
| Fire up engine number 1 |
| Start number 1 |
| Fire up number 1 |
|
Starts Engine #1. |
| |
| Engine #2 Fuel |
| (set) (turn) (the) Engine 2 fuel valve { ONOFF } |
| (set) (turn) (the) Number 2 fuel valve { ONOFF } |
| (set) (turn) (the) Engine number 2 fuel { ONOFF } |
| (set) (turn) (the) Number 2 fuel { ONOFF } |
|
Turns the Engine #2 fuel valve on or off. (Depends upon the number of engines) |
| |
| Engine #2 Startup |
| Start engine 2 |
| Start engine number 2 |
| Fire up engine 2 |
| Fire up engine number 2 |
| Start number 2 |
| Fire up number 2 |
|
Starts Engine #2. (Depends upon the number of engines) |
| |
| Engine #3 Fuel |
| (set) (turn) (the) Engine 3 fuel valve { ONOFF } |
| (set) (turn) (the) Number 3 fuel valve { ONOFF } |
| (set) (turn) (the) Engine number 3 fuel { ONOFF } |
| (set) (turn) (the) Number 3 fuel { ONOFF } |
|
Turns the Engine #3 fuel valve on or off. (Depends upon the number of engines) |
| |
| Engine #3 Startup |
| Start engine 3 |
| Start engine number 3 |
| Fire up engine 3 |
| Fire up engine number 3 |
| Start number 3 |
| Fire up number 3 |
|
Starts Engine #3. (Depends upon the number of engines) |
| |
| Engine #4 Fuel |
| (set) (turn) (the) Engine 4 fuel valve { ONOFF } |
| (set) (turn) (the) Number 4 fuel valve { ONOFF } |
| (set) (turn) (the) Engine number 4 fuel { ONOFF } |
| (set) (turn) (the) Number 4 fuel { ONOFF } |
|
Turns the Engine #4 fuel valve on or off. (Depends upon the number of engines) |
| |
| Engine #4 Startup |
| Start engine 4 |
| Start engine number 4 |
| Fire up engine 4 |
| Fire up engine number 4 |
| Start number 4 |
| Fire up number 4 |
|
Starts Engine #4. (Depends upon the number of engines) |
| |
| Exchange Com1 |
|
Swaps the Com1 and Com1 Standby frequencies. |
| |
| Exchange Com2 |
|
Swaps the Com2 and Com2 Standby frequencies. |
| |
| Exchange Nav1 |
|
Swaps the Nav1 and Nav1 Standby frequencies. |
| |
| Exchange Nav2 |
|
Swaps the Nav2 and Nav2 Standby frequencies. |
| |
| Flaps |
| Flaps |
| Set the flaps to |
| Extend the flaps to |
| Flaps up and trim |
| |
| one |
| two |
| five |
| six |
| eight |
| ten |
| eleven |
| twelve |
| fourteen |
| fifteen |
| eighteen |
| twenty |
| twenty-one |
| twenty-two |
| twenty-three |
| twenty-four |
| twenty-five |
| twenty-seven |
| thirty |
| thirty-two |
| thirty-four |
| thirty-five |
| thirty-seven |
| forty |
| forty-five |
seventy
|
| Give me zero on the flaps |
| Give me one on the flaps |
| Give me two on the flaps |
| Give me five on the flaps |
| Give me six on the flaps |
| Give me eight on the flaps |
| Give me ten on the flaps |
| Give me eleven on the flaps |
| Give me twelve on the flaps |
| Give me fourteen on the flaps |
| Give me fifteen on the flaps |
| Give me eighteen on the flaps |
| Give me twenty on the flaps |
| Give me twenty-one on the flaps |
| Give me twenty-two on the flaps |
| Give me twenty-three on the flaps |
| Give me twenty-four on the flaps |
| Give me twenty-five on the flaps |
| Give me twenty-seven on the flaps |
| Give me thirty on the flaps |
| Give me thirty-two on the flaps |
| Give me thirty-four on the flaps |
| Give me thirty-five on the flaps |
| Give me thirty-seven on the flaps |
| Give me forty on the flaps |
| Give me forty-five on the flaps |
| Give me seventy on the flaps |
|
Sets the flaps/slats to the requested angle.
IMPORTANT NOTE: The system will only recognise flap degrees that actually exist on the aircraft being flown.
For example, attempting to say "Flaps two" on an Airbus A320 will fail, since this setting
does not exist on an A320 - an error tone will be heard.
|
| |
| Flight Director |
| (Set) (the) flight director { ONOFF } |
| (Turn) (the) flight director { ONOFF } |
|
Sets the flight director on or off.
|
| |
| Fuel Pump |
| (Set) (the) fuel pump { ONOFF } |
| (Turn) (the) fuel pump { ONOFF } |
|
Sets the fuel pump on or off.
|
| |
| Go Around |
| Execute go around |
| Execute going around |
| Let's do a go around |
|
Causes the aircraft to execute a go around sequence.
|
| |
| Heading Indicator |
| (Set) (the) heading indicator { ONOFF } |
| (Turn) (the) heading indicator { ONOFF } |
|
Sets the heading indicator on or off.
|
| |
| Instrument or Panel Lights |
| (Set) (the) instrument lights { ONOFF } |
| (Turn) (the) instrument lights { ONOFF } |
| (Set) (the) panel lights { ONOFF } |
| (Turn) (the) panel lights { ONOFF } |
|
Sets strobe instrument/panel lights on or off.
|
| |
| Kneeboard |
|
Cycles through the kneeboard views. (F10 function) |
| |
| Landing Lights |
| (Set) (the) landing lights { ONOFF } |
| (Turn) (the) landing lights { ONOFF } |
|
Sets the landing lights on or off.
|
| |
| Listen to Both Coms |
|
Turns the both (BTH) coms switch on. |
| |
| Listen to Com1 |
|
Selects the Com1 radio, deselects the Com2 radio and deselects the both (BTH) function, if on. |
| |
| Listen to Com2 |
|
Selects the Com2 radio, deselects the Com1 radio and deselects the both (BTH) function, if on. |
| |
| Mach |
| Mach (point) { DIGIT } { DIGIT } |
| Mach speed (point) { DIGIT } { DIGIT } |
| Make the mach speed (point) { DIGIT } { DIGIT } |
| Example: |
| Mach point seven two |
|
Sets the mach speed.
|
| |
| Landing Gear |
| Landing gear up |
| Landing gear down |
|
Sets the landing gear up or down.
|
| |
| Logo Lights |
| (Set) (the) logo lights { ONOFF } |
| (Turn) (the) logo lights { ONOFF } |
|
Sets the logo lights on or off.
|
| |
| Marker Identity |
| (Set) (the) Marker Ident { ONOFF } |
| (Turn) (the) Marker Ident { ONOFF } |
| (Set) (the) Marker Identity { ONOFF } |
| (Turn) (the) Marker Identity { ONOFF } |
|
Sets the Marker Identity switch on or off. |
| |
| Nav1 Frequency |
| Set Nav1 to { DIGIT } { DIGIT } { DIGIT } point { DIGIT } |
| Tune Nav1 to { DIGIT } { DIGIT } { DIGIT } point { DIGIT } |
| Examples: |
| Set Nav1 to 113.0 |
| Tune Nav1 to 116.5 |
|
Sets the Nav1 frequency.
The system will only recognise valid Nav frequencies.
|
| |
| Nav1 Identity |
| (Set) (the) Nav1 Ident { ONOFF } |
| (Turn) (the) Nav1 Ident { ONOFF } |
| (Set) (the) Nav1 Identity { ONOFF } |
| (Turn) (the) Nav1 Identity { ONOFF } |
|
Sets the Nav1 Identity switch on or off. |
| |
| Nav1 Standby |
| Set Nav1 Standby to { DIGIT } { DIGIT } { DIGIT } point { DIGIT } |
| Tune Nav1 Standby to { DIGIT } { DIGIT } { DIGIT } point { DIGIT } |
| Examples: |
| Set Nav1 Standby to 109.0 |
| Tune Nav1 Standby to 111.5 |
|
Sets the Nav1 Standby frequency.
The system will only recognise valid Nav frequencies.
|
| |
| Nav2 Frequency |
| Set Nav2 to { DIGIT } { DIGIT } { DIGIT } point { DIGIT } |
| Tune Nav2 to { DIGIT } { DIGIT } { DIGIT } point { DIGIT } |
| Examples: |
| Set Nav2 to 113.0 |
| Tune Nav2 to 116.5 |
|
Sets the Nav2 frequency.
The system will only recognise valid Nav frequencies.
|
| |
| Nav2 Identity |
| (Set) (the) Nav2 Ident { ONOFF } |
| (Turn) (the) Nav2 Ident { ONOFF } |
| (Set) (the) Nav2 Identity { ONOFF } |
| (Turn) (the) Nav2 Identity { ONOFF } |
|
Sets the Nav2 Identity switch on or off. |
| |
| Nav2 Standby |
| Set Nav2 Standby to { DIGIT } { DIGIT } { DIGIT } point { DIGIT } |
| Tune Nav2 Standby to { DIGIT } { DIGIT } { DIGIT } point { DIGIT } |
| Examples: |
| Set Nav2 Standby to 109.0 |
| Tune Nav2 Standby to 111.5 |
|
Sets the Nav2 Standby frequency.
The system will only recognise valid Nav frequencies.
|
| |
| Navigation Lights |
| (Set) (the) navigation lights { ONOFF } |
| (Turn) (the) navigation lights { ONOFF } |
|
Sets the navigation lights on or off.
|
| |
| No Smoking |
| (Set) (the) smoking { ONOFF } |
| (Turn) (the) smoking { ONOFF } |
| (Set) (the) smoking sign { ONOFF } |
| (Turn) (the) smoking sign { ONOFF } |
| (Set) (the) no smoking { ONOFF } |
| (Turn) (the) no smoking { ONOFF } |
| (Set) (the) no smoking sign { ONOFF } |
| (Turn) (the) no smoking sign { ONOFF } |
|
Sets the no smoking sign on or off.
|
| |
| Panel or Instrument Lights |
| (Set) (the) panel lights { ONOFF } |
| (Turn) (the) panel lights { ONOFF } |
| (Set) (the) instrument lights { ONOFF } |
| (Turn) instrument lights { ONOFF } |
|
Sets strobe instrument/panel lights on or off.
|
| |
| Parking Brakes |
| (Set the) parking brakes { ONOFF } |
| (Turn the) parking brakes { ONOFF } |
|
Sets the parking brakes on or off. |
| |
| Pitot Heater |
| (Set) (the) pitot { ONOFF } |
| (Turn) (the) pitot { ONOFF } |
| (Set) (the) pitot heat { ONOFF } |
| (Turn) (the) pitot heat { ONOFF } |
| (Set) (the) pitot heater { ONOFF } |
| (Turn) (the) pitot heater { ONOFF } |
|
Sets the pitot heater on or off.
NOTE: Pronounced pee tot
|
| |
| Recognition Lights |
| (Set) (the) recognition lights { ONOFF } |
| (Turn) (the) recognition lights { ONOFF } |
|
Sets the recognition lights on or off.
|
| |
| Reject Takeoff |
| Reject Takeoff |
| Abort Takeoff |
|
Causes the aircraft to execute a rejected takeoff sequence.
|
| |
| Reverse Thrust |
Reverse Thrust { ONOFF} |
Enables or disables the reverse thrust. |
| |
RTO... aka, Reject Takeoff |
| Abort take off |
| Reject take off |
|
Executes the Rejected Take Off (RTO) sequence.
NOTE: This needs to be called out BEFORE V1 and will only execute if Autobrakes are set to RTO. |
| |
| Reset Spoilers |
| Reset (the) spoilers |
| Retract (the) spoilers |
| (set) (extend) (the) spoilers to { SPOILER DEGREES } |
|
Sets the spoilers to the desired position. |
| |
| Seat Belts |
| (Set) (the) seat belts { ONOFF } |
| (Turn) (the) seat belts { ONOFF } |
| (Set) (the) seat belts sign { ONOFF } |
| (Turn) (the) seat belts sign { ONOFF } |
| (Set) (the) fasten seat belts { ONOFF } |
| (Turn) (the) fasten seat belts { ONOFF } |
| (Set) (the) fasten seat belts sign { ONOFF } |
| (Turn) (the) fasten seat belts sign { ONOFF } |
|
Sets the seat belts sign on or off.
|
| |
| Strobe Lights |
| (Set) (the) strobe lights { ONOFF } |
| (Turn) (the) strobe lights { ONOFF } |
|
Sets strobe lights on or off.
|
| |
| Sunrise Sunset |
| (What are the) sunrise sunset times |
| (What are the) sunset sunrise times |
|
Reads back the sunrise and sunset times.
|
| |
| Taxi Lights |
| (Set) (the) taxi lights { ONOFF } |
| (Turn) (the) taxi lights { ONOFF } |
|
Sets the taxi lights on or off.
|
| |
| Taxi Speed |
Maintain taxi speed |
The FO will maintain a taxi speed between 15-19 knots (depending upon winds) and is cancelled when the brakes are touched. |
| |
| TO/GO |
| (Set the) take off go around { ONOFF } |
| (Turn the) take off go around { ONOFF } |
| (Set the) T O G A { ONOFF } |
| (Turn the) T O G A { ONOFF } |
|
Sets the TO/GO switch on or off. |
| |
| Transponder |
| Set (the) transponder to { DIGIT } { DIGIT } { DIGIT } { DIGIT } |
| Tune transponder to { DIGIT } { DIGIT } { DIGIT } { DIGIT } |
| (Set) Squawk (to) { DIGIT } { DIGIT } { DIGIT } { DIGIT } |
| Examples: |
| Set Transponder to 1234 |
| Tune Transponder to 0123 |
| Squawk 5678 |
|
Sets the Transponder frequency.
|
| |
| Wing Lights |
| (Set) (the) wing lights { ONOFF } |
| (Turn) (the) wing lights { ONOFF } |
|
Sets the wing lights on or off.
|
| |
| Yaw Damper |
| (Set) (the) yaw damper { ONOFF } |
| (Turn) (the) yaw damper { ONOFF } |
|
Sets the yaw damper on or off.
|
| |
| Zulu Time |
| Set (the) time to Zulu |
| Reset (the) time to Zulu |
| Use Zulu time |
|
Synchronises the Flight Simulator's clock time to Zulu
|
|